Description
Model: BSDITRI2-1 | Medical-Grade 2×1 12G-SDI Video & Trigger Switcher
The Bioni SDI EndoConnect 2-1 is a purpose-built video and trigger signal switcher designed for endoscopy suites, day surgeries, and hospital procedure rooms. It allows two independent endoscopy processors to share a single reporting workstation — eliminating the need to manually swap SDI and trigger cables between cases. The result: faster room turnover, less wear on connectors, and a more reliable clinical workflow.
- Dual video + trigger switching — Route video and trigger signals from two endoscopy processors to your reporting software at the press of a sealed stainless steel button. Switching is instantaneous, with clear front-panel LED indication of the active input.
- True 12G-SDI image quality — Supports SD, HD, 3G, 6G, and 12G-SDI up to 4K UHD at 60Hz (11.88 Gbps), with 8/10/12-bit deep colour and built-in jitter reduction for clean signal across longer cable runs. Fully compliant with SMPTE 259, 292, 424, ST 2081, and ST 2082.
- Medical-grade construction — Sealed die-cast aluminium alloy enclosure (ADC-10, JIS compliant) rated to IP65 (IEC 529) and NEMA 4 — dust-tight and hose-proof for fluid-intensive clinical environments.
- Plug-and-play reporting integration — BNC video and trigger I/O on the rear panel connect directly to your existing endoscopy stack and reporting workstation via a standard SDI-to-USB capture and BNC-to-DB9 trigger interface.
- Designed and supported in Australia — Backed by direct local support from Bioni Medical, with fast response times and clinically-aware troubleshooting.
Technical Specifications
USER MANUAL SDI ENDOCONNECT 2-1 V2.0
| Video standards | SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI |
| Max resolution | 2160p (4K UHD) @ 60Hz |
| Max data rate | 11.88 Gbps |
| Colour depth | 8-bit, 10-bit, 12-bit |
| Connectors | 7× BNC female (2 video in, 1 video out, 2 trigger in, 1 trigger out), 1× DC power jack |
| Enclosure rating | IP65 / NEMA 4 |
| Dimensions | 162 × 85 × 25 mm (6.4″ × 3.3″ × 1.0″) |
| Weight | 380 g |
| Operating temp | 0°C to +70°C |
| Power | 5V DC, 2A (240 VAC 50/60 Hz adapter included) |
What’s in the Box
- 1 × Bioni SDI EndoConnect 2-1 unit
- 1 × 5V DC power supply (240 VAC, 50/60 Hz)
Note: Cables are not included. The Bioni SDI Cable Pack is sold separately to allow flexibility in configuring the unit to your existing endoscopy stack and reporting workstation.
Reviews
There are no reviews yet.